- Apply for AWG: 16-22 (1.3-0.3mm²)
- Operating temperature: 14℉-176℉
- Female/male connector hole diameter: 6mm/0.24"
- Use for cars, trucks, boats, motorcycles, trailers, scooters, quad bikes, trikes, caravans, marine, jet skis, and other wire connections.
NOTE:
- It is important to identify the insulation tabs, conductor tabs, and wings on the terminals.
These wings work for locking the connectors. ***DON’T CRIMP WINGS***
Crimp conductor tabs to the stripped wires. Crimp insulation tabs to the insulated wires.
Don't deform the terminals (otherwise, the terminals and connectors will not be locked).
- PULL TEST is very important.
Pull test to make sure that the terminals are crimped well; If the terminals do not tighten into place, the wires will easily be pulled out from the connectors.
If you have trouble crimping the terminals. The terminal crimping tool (Weather Pack Crimper) could help you tighten the terminals on the wires very well.
- There is only one direction to insert terminals. (The way like picture shows.)
The terminals lock the connector with a snap.
Once you insert terminals, they will not be pulled out again. If you put them in the wrong direction, they will be pulled out easily.
- Don't put the red clip before you insert female terminals into the male connector.
- Don’t need to put the red clip into the female connector (it’s already in).